DIY Appliance Repair Tips

Wait! Before you decide to hire an appliance repair Yonkers for assistance, you can keep your appliances running like new with the help of some of the troubleshooting tips in this post.

1. Smelly Washing Machine

The presence of a foul smell in your washing machine can defeat the entire purpose of the appliance! If you’re attempting to get your laundry items so they are clean and fresh, but the washer won’t cooperate, run an cycle with no clothes/laundry in warm water with 2 cups of white vinegar and 1/2 cup of baking soda to get rid of the odor. This problem frequently occurs in front-loading washing machines. To eliminate odors in the future, crack the door open after washes so it can dry out.

2. Inefficient Refrigerant

A warm fridge is never a good sign. A warm refrigerator definitely won’t keep liquids cold, and the food on the inside might also be close to going rotten! In some cases, your refrigerator might not be in need of repair; instead the inside might just need a cleaning. Or the coils on the rear of the appliance require cleaning.

Unplug the appliance and move it out from the kitchen wall before wiping down the coils. If you cannot see cooling improvement, it’s best to hire a professional appliance repair service in Yonkers for a diagnosis.

3. Clicking Igniter on Stove

If the igniter on your gas-powered stove clicks nonstop and the burner doesn’t light, look to make sure your burner lid is on tight and correctly aligned. You might experience this issue if you have had a recent boil over or liquid spill on the top of the stove.

Otherwise, the cause is probably a clogged igniter. To clean , first remove the burner cap and dust off any dirt. You can also use a clothes pin to pick dirt from the grooves of the igniter. If that doesn’t fix the problem, it is smart to not disassemble a lighter for anyone without right training; in this case enlist a professional appliance repairman to determine the problem.

4. Broken Garbage Disposal

Your garbage disposal has self-protection in the form of an overload trip. If it is clogged, overheats, grinds for too long, or has a different issue, the disposal could just have to be reset instead of fixed. You should be sure the power switch is turned OFF. Then, locate the button on the disposal beneath the sink and then press the switch. If the switch won’t stay pushed in, wait a few minutes and then try again. Turn on the water and then press the button on.

If the garbage disposal is filled with waste and you hear nothing but a humming noise instead of waste grinding, you may need to manually unwind the disposal blades using a hex key to remove the clog. Next, press the reset button to get the disposal working again. If these tips fail to get the appliance working like normal, don’t succumb to the temptation to stick your arms down in the system to troubleshoot. Be smart and set up an appointment with a professional appliance service in Yonkers.

5. No Power from Outlet

In a home’s kitchen or bathroom, the outlets must be equipped with GFCI switches in order to protect people against harm in wet areas. If a GFCI electrical outlet isn’t generating power, press the red reset switch to see if that restores power.

If it does not, or if you’re trying on a basic outlet, make certain that a breaker has not been tripped in the breaker box. If you are not sure if a breaker was tripped, switch it so it is in the OFF position and back into the ON position. Just remember, safety near electricity is critical. Should you have any concerns, call a professional.

6. Wobbling Washing Machine

A wobbling washing machine will create quite a startling racket and is not a good process to wash clothing. If yours is abruptly shaking, the unit might be broken. In order to repair this issue, turn the legs of the machine to lift or lower each of the corners until it’s level. Another likely case is that the unit is not leveled. Open the lid and arrange the shirts and pants so that they’re more evenly dispersed inside of the drum of the washer.

Doing this could help the washing machine not have to work quite as hard. If you try to rearrange the clothing a few times without luck, don’t ignore the issue. You might have a loosened drum or motor mount to fix, which can be easy for a professional repairman to repair. But continuing to operate your washing machine when it has this problem could destroy some of the other components and cause a more costly repair later.

Call for Help

If these quick fixes can solve your problems, you will want to schedule an appointment from All-Pro Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts

CLICK-TO-CALL